Adds that ‘something special’ to your costumes and special event wear. Has the look of normal film during the daytime and at night it provides a luminous, long-lasting glow.
TDS(Technical data sheet) PDF
- Yellow only
- High wash resistance
- Catches the light and glows under dark conditions
WE RECOMMEND THE FOLLOWING CONDITIONS TO ACHIEVE THE BEST RESULTS :
HOW TO USE
Feed the material into the plotter machine hotmelt side facing up.
- Select an existing design or create your own on the computer
(NB : Design must be mirrored.)
- Change the machine settings according to the material's conditions
(If unsure, see the PDF provided above.)
On a flat surface take a weeder and remove any parts not necessary for your design.
PREHEAT & POSITION
The ideal heating, pressure and time conditions for press can be seen in the photo above.
Preheat the garment and arrange the weeded design in your desired placement and then press.
PEEL OFF CARRIER
Gently remove PET film from the top side of the design.
( *Disclaimer - These instructions may very according to the material and machine type used-for best results check the specifications. )